Was this page helpful?
Caution
You're viewing documentation for a previous version of Scylla Manager. Switch to the latest stable version.
The repair commands allow you to: create and update a repair (ad-hoc or scheduled), and change selected parameters while a repair is running.
This command allows you to schedule or run ad-hoc cluster repair. Repair speed is controlled by two flags –parallel and –intensity. The values of those flags can be adjusted while a repair is running using the control subcommand.
sctool repair --cluster <id|name> [--intensity] [--parallel] [flags]
-c, --cluster
¶The target cluster name or ID (envvar SCYLLA_MANAGER_CLUSTER).
--cron
¶Task schedule as a cron expression. It supports the extended syntax including @monthly, @weekly, @daily, @midnight, @hourly, @every X[h|m|s].
--dc
¶A list of datacenter glob patterns separated by a comma, e.g. ‘dc1,!otherdc*’ used to specify the datacenters to include or exclude. The following syntax for glob patterns is supported:
‘*’ - matches any number of any characters including none
‘?’ - matches any single character
‘[abc]’ - matches one character given in the bracket
‘[a-z]’ - matches one character from the range given in the bracket
Patterns are evaluated from left to right. If a pattern starts with ‘!’ it unselects items that were selected by previous patterns i.e. ‘a?,!aa’ selects ab but not aa.
Default value: []
--dry-run
¶Validates and displays repair information without actually scheduling the repair. This allows you to display what will happen should the repair run with the parameters you set.
Default value: false
--enabled
¶Not enabled tasks are not executed and are hidden from the task list.
Default value: true
--fail-fast
¶Stops the task run on the first error.
Default value: false
-h, --help
¶help for repair
Default value: false
--host
¶Address of a node to repair, you can use either an IPv4 or IPv6 address. Specifying the host flag limits repair to token ranges replicated by a given node. It can be used in conjunction with –dc flag, in such a case the node must belong to the specified datacenters.
--ignore-down-hosts
¶Do not repair nodes that are down i.e. in status DN.
Default value: false
--intensity
¶How many token ranges per shard to repair in a single Scylla node at the same time. It can be a decimal between (0,1), in that case it specifies percent of shards that can be repaired in parallel on a repair master node. Zero (0) is a special value, the number of token ranges is adjusted to the maximum supported by node (see max_repair_ranges_in_parallel in Scylla logs). Changing the intensity impacts repair granularity if you need to resume it, the higher the value the more work on resume.
Default value: 1
-i, --interval
¶–interval is deprecated, please use –cron instead
Time after which a successfully completed task would be run again. The supported units are:
‘d’ - days
‘h’ - hours
‘m’ - minutes
‘s’ - seconds
‘ms’ - milliseconds
The task run date is aligned with ‘–start date’ value. For example, if you select ‘–interval 7d’ task would run weekly at the ‘–start-date’ time.
-K, --keyspace
¶A list of glob patterns separated by a comma used to include or exclude tables. The patterns match keyspaces and tables, separate the keyspace name from the table name with a dot e.g. ‘keyspace,!keyspace.table_prefix_*’. The following syntax for glob patterns is supported:
‘*’ - matches any number of any characters including none
‘?’ - matches any single character
‘[abc]’ - matches one character given in the bracket
‘[a-z]’ - matches one character from the range given in the bracket
Patterns are evaluated from left to right. If a pattern starts with ‘!’ it unselects items that were selected by previous patterns i.e. ‘a?,!aa’ selects ab but not aa.
Default value: []
--name
¶Task name that can be used insead of ID.
-r, --num-retries
¶Number of times a task reruns following a failure.
Default value: 3
--parallel
¶The maximum number of Scylla repair jobs that can run at the same time (on different token ranges and replicas). Each node can take part in at most one repair at any given moment. By default the maximum possible parallelism is used. The effective parallelism depends on a keyspace replication factor (RF) and the number of nodes. The formula to calculate is is as follows: number of nodes / RF, ex. for 6 node cluster with RF=3 the maximum parallelism is 2.
Default value: 0
--retry-wait
¶Initial exponential backoff duration X[h|m|s]. With –retry-wait 10m task will wait 10 minutes, 20 minutes and 40 minutes after first, second and third consecutire failure.
Default value: 10m
--show-tables
¶Prints table names together with keyspace, used in combination with –dry-run.
Default value: false
--single-host-parallelism
¶Defines max parallelism per single host. Use this flag to ensure there will be no more than single-host-parallelism repair jobs executed on a single node at the same time. There is no limitation by default.
Default value: 0
--small-table-threshold
¶Enables small table optimization for tables of size lower than given threshold, supported units [B, M, G, T].
Default value: 1G
-s, --start-date
¶–start-date is deprecated, please use –cron instead
The date can be expressed relatively to now or as a RFC3339 formatted string. To run the task in 2 hours use ‘now+2h’. The supported units are:
‘d’ - days
‘h’ - hours
‘m’ - minutes
‘s’ - seconds
‘ms’ - milliseconds
If you want the task to start at a specified date use RFC3339 formatted string i.e. ‘2018-01-02T15:04:05-07:00’. If you want the repair to start immediately, use the value ‘now’ or skip this flag.
--timezone
¶Timezone of –cron and –window flag values. The default value is taken from this system, namely ‘TZ’ envvar or ‘/etc/localtime’ file.
Default value: UTC
--window
¶A comma-separated list of time markers in a form [WEEKDAY-]HH:MM. WEEKDAY can be written as the whole word or only using the first 3 characters, HH:MM is an hour from 00:00 to 23:59.
‘MON-00:00,FRI-15:00’ - can be executed from Monday to Friday 3PM
‘23:00,06:00’ - can be executed every night from 11PM to 6AM
‘23:00,06:00,SAT-00:00,SUN-23:59’ - can be executed every night from 11PM to 6AM and all day during the weekend
Default value: []
--api-cert-file
File path to HTTPS client certificate used to access the Scylla Manager server when client certificate validation is enabled (envvar SCYLLA_MANAGER_API_CERT_FILE).
--api-key-file
File path to HTTPS client key associated with –api-cert-file flag (envvar SCYLLA_MANAGER_API_KEY_FILE).
--api-url
Base URL of Scylla Manager server (envvar SCYLLA_MANAGER_API_URL).
If running sctool on the same machine as server, it’s generated based on ‘/etc/scylla-manager/scylla-manager.yaml’ file.
Default value: http://127.0.0.1:5080/api/v1
This command allows you to change repair parameters while a repair is running.
sctool repair control --cluster <id|name> [flags]
-c, --cluster
¶The target cluster name or ID (envvar SCYLLA_MANAGER_CLUSTER).
-h, --help
¶help for control
Default value: false
--intensity
¶How many token ranges per shard to repair in a single Scylla node at the same time. It can be a decimal between (0,1), in that case it specifies percent of shards that can be repaired in parallel on a repair master node. Zero (0) is a special value, the number of token ranges is adjusted to the maximum supported by node (see max_repair_ranges_in_parallel in Scylla logs). Changing the intensity impacts repair granularity if you need to resume it, the higher the value the more work on resume.
Default value: 1
--parallel
¶The maximum number of Scylla repair jobs that can run at the same time (on different token ranges and replicas). Each node can take part in at most one repair at any given moment. By default the maximum possible parallelism is used. The effective parallelism depends on a keyspace replication factor (RF) and the number of nodes. The formula to calculate is is as follows: number of nodes / RF, ex. for 6 node cluster with RF=3 the maximum parallelism is 2.
Default value: 0
--api-cert-file
File path to HTTPS client certificate used to access the Scylla Manager server when client certificate validation is enabled (envvar SCYLLA_MANAGER_API_CERT_FILE).
--api-key-file
File path to HTTPS client key associated with –api-cert-file flag (envvar SCYLLA_MANAGER_API_KEY_FILE).
--api-url
Base URL of Scylla Manager server (envvar SCYLLA_MANAGER_API_URL).
If running sctool on the same machine as server, it’s generated based on ‘/etc/scylla-manager/scylla-manager.yaml’ file.
Default value: http://127.0.0.1:5080/api/v1
This command allows you to modify properties of an already existing repair task. If there is one repair task the ‘repair/task-id’ argument is not needed.
sctool repair update --cluster <id|name> [flags] [<repair/task-id>]
-c, --cluster
¶The target cluster name or ID (envvar SCYLLA_MANAGER_CLUSTER).
--cron
¶Task schedule as a cron expression. It supports the extended syntax including @monthly, @weekly, @daily, @midnight, @hourly, @every X[h|m|s].
--dc
¶A list of datacenter glob patterns separated by a comma, e.g. ‘dc1,!otherdc*’ used to specify the datacenters to include or exclude. The following syntax for glob patterns is supported:
‘*’ - matches any number of any characters including none
‘?’ - matches any single character
‘[abc]’ - matches one character given in the bracket
‘[a-z]’ - matches one character from the range given in the bracket
Patterns are evaluated from left to right. If a pattern starts with ‘!’ it unselects items that were selected by previous patterns i.e. ‘a?,!aa’ selects ab but not aa.
Default value: []
--dry-run
¶Validates and displays repair information without actually scheduling the repair. This allows you to display what will happen should the repair run with the parameters you set.
Default value: false
--enabled
¶Not enabled tasks are not executed and are hidden from the task list.
Default value: true
--fail-fast
¶Stops the task run on the first error.
Default value: false
-h, --help
¶help for update
Default value: false
--host
¶Address of a node to repair, you can use either an IPv4 or IPv6 address. Specifying the host flag limits repair to token ranges replicated by a given node. It can be used in conjunction with –dc flag, in such a case the node must belong to the specified datacenters.
--ignore-down-hosts
¶Do not repair nodes that are down i.e. in status DN.
Default value: false
--intensity
¶How many token ranges per shard to repair in a single Scylla node at the same time. It can be a decimal between (0,1), in that case it specifies percent of shards that can be repaired in parallel on a repair master node. Zero (0) is a special value, the number of token ranges is adjusted to the maximum supported by node (see max_repair_ranges_in_parallel in Scylla logs). Changing the intensity impacts repair granularity if you need to resume it, the higher the value the more work on resume.
Default value: 1
-i, --interval
¶–interval is deprecated, please use –cron instead
Time after which a successfully completed task would be run again. The supported units are:
‘d’ - days
‘h’ - hours
‘m’ - minutes
‘s’ - seconds
‘ms’ - milliseconds
The task run date is aligned with ‘–start date’ value. For example, if you select ‘–interval 7d’ task would run weekly at the ‘–start-date’ time.
-K, --keyspace
¶A list of glob patterns separated by a comma used to include or exclude tables. The patterns match keyspaces and tables, separate the keyspace name from the table name with a dot e.g. ‘keyspace,!keyspace.table_prefix_*’. The following syntax for glob patterns is supported:
‘*’ - matches any number of any characters including none
‘?’ - matches any single character
‘[abc]’ - matches one character given in the bracket
‘[a-z]’ - matches one character from the range given in the bracket
Patterns are evaluated from left to right. If a pattern starts with ‘!’ it unselects items that were selected by previous patterns i.e. ‘a?,!aa’ selects ab but not aa.
Default value: []
--name
¶Task name that can be used insead of ID.
-r, --num-retries
¶Number of times a task reruns following a failure.
Default value: 3
--parallel
¶The maximum number of Scylla repair jobs that can run at the same time (on different token ranges and replicas). Each node can take part in at most one repair at any given moment. By default the maximum possible parallelism is used. The effective parallelism depends on a keyspace replication factor (RF) and the number of nodes. The formula to calculate is is as follows: number of nodes / RF, ex. for 6 node cluster with RF=3 the maximum parallelism is 2.
Default value: 0
--retry-wait
¶Initial exponential backoff duration X[h|m|s]. With –retry-wait 10m task will wait 10 minutes, 20 minutes and 40 minutes after first, second and third consecutire failure.
Default value: 10m
--show-tables
¶Prints table names together with keyspace, used in combination with –dry-run.
Default value: false
--single-host-parallelism
¶Defines max parallelism per single host. Use this flag to ensure there will be no more than single-host-parallelism repair jobs executed on a single node at the same time. There is no limitation by default.
Default value: 0
--small-table-threshold
¶Enables small table optimization for tables of size lower than given threshold, supported units [B, M, G, T].
Default value: 1G
-s, --start-date
¶–start-date is deprecated, please use –cron instead
The date can be expressed relatively to now or as a RFC3339 formatted string. To run the task in 2 hours use ‘now+2h’. The supported units are:
‘d’ - days
‘h’ - hours
‘m’ - minutes
‘s’ - seconds
‘ms’ - milliseconds
If you want the task to start at a specified date use RFC3339 formatted string i.e. ‘2018-01-02T15:04:05-07:00’. If you want the repair to start immediately, use the value ‘now’ or skip this flag.
--timezone
¶Timezone of –cron and –window flag values. The default value is taken from this system, namely ‘TZ’ envvar or ‘/etc/localtime’ file.
Default value: UTC
--window
¶A comma-separated list of time markers in a form [WEEKDAY-]HH:MM. WEEKDAY can be written as the whole word or only using the first 3 characters, HH:MM is an hour from 00:00 to 23:59.
‘MON-00:00,FRI-15:00’ - can be executed from Monday to Friday 3PM
‘23:00,06:00’ - can be executed every night from 11PM to 6AM
‘23:00,06:00,SAT-00:00,SUN-23:59’ - can be executed every night from 11PM to 6AM and all day during the weekend
Default value: []
--api-cert-file
File path to HTTPS client certificate used to access the Scylla Manager server when client certificate validation is enabled (envvar SCYLLA_MANAGER_API_CERT_FILE).
--api-key-file
File path to HTTPS client key associated with –api-cert-file flag (envvar SCYLLA_MANAGER_API_KEY_FILE).
--api-url
Base URL of Scylla Manager server (envvar SCYLLA_MANAGER_API_URL).
If running sctool on the same machine as server, it’s generated based on ‘/etc/scylla-manager/scylla-manager.yaml’ file.
Default value: http://127.0.0.1:5080/api/v1
Was this page helpful?